English
French
VisionHD4 Capture Card
3.988,00€
Capture four DVI-I High Definition DVI streams in a single capture card.
10 in stock (can be backordered)
Description
The VisionHD4 is an eight lane PCI Express capture card with four independent video capture channels, supporting HD capture.
This video capture card provides a high performance high density video capture solution for control room, medical and other applications that require high capture bandwidth. The quad HD capture capability in combination with Datapath’s multi stream and synchronisation features enables resolutions up to 4096×2048 and Quad HD solutions.
The VisionHD4 captures all four HD video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside embedded HDMI audio streams can also be captured from each channel.
This full length video capture card has four capture processors, each providing 800 MB/s bandwidth.
For application case studies using this capture card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding on the Prasara Rapid Bus (Kuala Lumpur)
Key Qualities of the VisionHD4 Capture Card:
General Capture Card Features:
- Eight Lane PCI Express Gen.3 bus
- 3.2 GB/s total capture bandwidth in four PCIe lanes Gen.3 or 8 lanes Gen. 2
- Frame buffer memory 4×256 MB
- Datapath unified Windows and Linux driver support
- HDCP supported when used with Datapath graphics cards
Quad DVI-I Capture Channel:
- Max resolution up to 4096×2048, at 165 MHz Pixel Clock (Digital modes) or 170 Msps in analogue modes
- HDMI audio capture with streaming from each DVI Channel
- ~800 MB/s bandwidth per capture processor, 3.2 GB/s for the card
Download:
Specification of the VisionHD4 Capture Card:
| Board Format | Full size 8 lane PCIe 3-0 interface, 111mm x 312mm (H x L) |
| Connectors | Two DMS59 high density video connectors |
| Maximum Sample Rate | 170 Mpixels per second analogue RGB or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling |
| Maximum Data Rate | ~800 MB/s bandwidth per capture processor, 3.2 GB/s for the card |
| Video Sampling | RGB: 24 bits per pixel/ 8-8-8 format |
| Video Capture Memory | 256 MB per capture channel, triple buffered |
| Analogue RGB Mode Support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
| DVI Single-Link Mode Support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
| HD Modes | 1080p, 1080i, 720p, 576p, 480p and 480i suing a Component-DVI connector. For HDCP support contact the sales department for more information |
| Input Modes Detection | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
| Pixel Transfer Formats | RGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit, 32 bit) pixels YUV: 16 bit (4:2:2) MONO: 8 bit |
| Update Rate | User defined, capture frame rate will match the source providing max data rate (800MB/s) is not exceeded. Multi-buffered to eliminate tearing artifacts |
| Video Format Options | Analogue RGB plus HSync and VSync (5 wire) Analogue RGB with Composite Sync (4 wire) Analogue RGB with sink on Green/ YPbPr (3 wire)DVI Single Link, HDMI 1.3 |
| Operating system support | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (NOTE: Check Linux specific features with Sales) |
| Power Requirements | Max current at 1.9A @ 12V Max current at 2.5A @ 3.3A Max power 31 Watts |
| Operating Temperature | 0 to 35 °C/ 32 to 96 °F |
| Storage Temperature | -20 to 70 °C/ -4 to 158 °F |
| Relative Humidity | 5% to 90% non-condensing |
| Warranty | 3 years |
Datapath is continuously developing the technology used within their product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
